The idea is to get a pump that not only pumps or circulates the machine coolant but Continue reading
Wastecorp is pleased to announce our water trailer pump products based on our award winning honey wagon pump out platform. Water trailers, (also referred to as “Water Buffalo”) provide fresh water distribution using a higher pressure trash pump or diaphragm pump. These water distribution systems are used to control dust on construction sites, cement cutting water needs, landscaping, paving companies, special venue water services and military water distribution needs.
Water Trailer Tank Sizes
Wastecorp water trailers are available in sizes ranging from 150-5000 gallons directly from Wastecorp or qualified dealers in the USA or Canada. The best part is, your water trailer is manufactured by Wastecorp Pumps with hosing, check plate galvanized deck material and frame, so you’re getting a professional system by a professional ISO 9001 certified water trailer manufacturer. Continue reading
Since we launched the Sludge Pro Disc Pump product line, there have been several questions as to whether or not a single disc or double disc pump is more appropriate for specific wastewater treatment applications.
To be clear, there is not always a need for a double disc pump. A single disc pump will fit the pump specification properly. One of the reasons why consulting engineers and contractors have put the double disc pump specification in place is because up until recently there have been few other alternatives. In many cases, a double disc pump is simply overkill in both pump, footprint, cost and maintenance time down the road.
Take the Sludge Pro single disc pump for example. This pump series offers up to 150 GPM pumping capabilities with a single disc, trunnion and pump body. This reduces the footprint in most municipal WWTP’s by at least 20%. You also reduce repair costs by replacing only one disc, trunnion and connecting rod instead of two. With over 21 years of pump manufacturing experience, Wastecorp designed the Sludge Pro with a heavy duty ball valve configuration because this design has demonstrated improved solids and slurry pumping capabilities over traditional double disc pump manufacturers. The Sludge Pro single disc pump is available in 3”, 4” and 6” connection sizes with discharge head up to 184’ or 80 psi. You can learn more about Sludge Pro single disc pumps at http://www.wastecorp.com/disc-pumps.html or speak to a disc pump engineer at 1-888-829-2783 anywhere in the United States and Canada. You can email email@example.com to find out where the closest double disc pump or single disc pump engineer is closest to you. There are also educational resources about double disc pumps and single disc pumps at your disposal. See video comparing disc pumps and decide for yourself. You can also see video of both double disc pumps and single disc pumps by clicking here.
When looking for a vacuum pump there are several questions that you should be considering.
First you need to establish weather or not you need a diaphragm pump or an actual vacuum pump. This question can be addressed by knowing the following:
What are you pumping?
Waste trap grease, caked in sediment, hardened mud and thicker fluids are all good applications for a vacuum pump. Why? These types of fluids require high suction power to either transfer the fluid in the case of waste trap grease or loosen the caked in mud and sediment. We see this a lot when a customer has a waste fluid pit and the water sits on top in the pit or tank and the mud, silt sediment or grease sits on the bottom. To get that material through the pump you need a high rate of vacuum power. Continue reading